New Hard Drive For 2013 Mac Pro
New Hard Drive For 2013 Mac Pro > https://urlin.us/2sUCJW
Unlike previous Mac Pro models, which have four 3.5" hard drive bays and two 5.25" optical drive bays and can hold a variety of hard drives, SSDs, and/or optical drives, the Cylinder Mac Pro models have no traditional drive bays at all.
The SSD in the Cylinder Mac Pro is fast, but users who like to have a number of internal drives may prefer to stick with an older Mac Pro model for a while longer. However, it is quite possible to upgrade the internal "blade" SSD in the Cylinder Mac Pro and external storage also is readily available.
This second video covers how to install the original SSD from your Mac Pro in OWC's convenient "Envoy Pro" external case, which is provided free with the purchase of a new SSD, to repurpose the old one as an external drive:
Because of their vinage, external Thunderbolt 2 storage options are getting harder to find these days, but the OWC Thunderbay 4 with four "traditional" drive bays to install SSD or hard drive storage of your choosing still is available while supplies last.
While the latest computers containing these drives boast about groundbreaking speeds, Mac users have taken advantage of these lightning-fast hard drives for years. The Mac Pro (Late 2013) was one of the first commercially available machines to feature the new style of SSD, albeit an early version.
Once the screw is fully removed, hold the top of the drive and pull up to release the drive from the slot. You may have to wiggle the drive a little, but be gentle, and it should release without too much issue.
To mark the first anniversary of my wildly successful blog post (garnering tens of thousands of views), The Definitive Classic Mac Pro (2006-2012) Upgrade Guide, I'm proud to announce a sequel. The Definitive Trash can Mac Pro 2013 upgrade guide started in jest on social media as the guide no one wanted, but there is a surprising depth the upgrades. The 2013 Mac Pro is a tale of hubris for Apple, as it over-promised and under-delivered and is considerably less upgradeable than its predecessor. Is there a need or demand for such a guide? I don't know, but here we are, and while the origins are jocular, the rest of this guide is serious. While most users (and Apple engineers) probably prefer moniker "cylinder," the trash can title stuck due to its obvious physical characteristics.
The Mac Pro 2013 has the dubious honor as the longest-produced Macintosh, besting the Macintosh Plus produced from 1986 to 1990 without an upgrade. The 2013 Mac Pro was conceived as the original Mac Pro's successor, eschewing the modularity for a (debatably) stylish and radical redesign. After a few positive reactions by publications for its foreign looks, it quickly became snubbed for its lack of upgradability, stability, and Apple's complete and absolute antipathy (verging on enmity) towards it.
The Mac Pro 2013 has been prone to an abnormal rate of failures due to heat, with a nameless Apple exec quoted as saying, "think we designed ourselves into a bit of a thermal corner if you will". Apple also took steps to extend its repair program, but problems persist. Despite the naysayers, the Mac Pro 2013 isn't without its fans (no pun intended), as at the time of its unveiling, it was a powerful, quirky computer in a diminutive form factor. Despite its limited upgradability, the computer is a modular design, and nearly ever significant part can be replaced. Only the 2019 Mac Pro since it has allowed for the range of user serviceability of the 2013 (although the iMac 5k is a close second). It's the bridge to a bygone era where CPUs and storage, and even GPUs were removable. Perhaps the 2019 Mac Pro a return to PCIe, but more than likely, 2013 will be the template.. Edit: The Mac Pro 2019 marks an expensive return to PCIe.
The Mac Pro line debuted in 2006 and has had seven major iterations by Apple's nomenclature, 1.1, 2.1, 3.1, 4.1, 5.1, 6.1 and the mighty 7,1. These are also generally referred to by the year 2006 (1.1, 2,1), less commonly 2007 (2,1), 2008 (3,1), 2009 (4,1), 2010-2012 (5,1), 2013 (6,1) and the 2019 (7,1). The other terms for these computers are divided between "Cheesegrater" (2006-2012), "Trash can" (late 2013) or "Cylinder," and "expensive" likely the most attached adjective to the Mac Pro 2019. For this guide's purpose, I will refer to the Mac Pro as "trash can" as the 2013 (as does much of the internet). Please note This guide only covers the 2013 Mac Pro.
Please note This guide only covers the 2013 Mac Pro. For all other models, I've written a massive guide, The Definitive Classic Mac Pro (2006-2012) Upgrade Guide and a budding Mac Pro 2019 Upgrade Guide.
Apple has only shipped a grand total of 3 base configurations with a fourth build-to-order option for the 12-core CPU. Apple has only made one minor change in the past six years to the Mac Pro 2013 by removing the original base configuration and lowering the remaining models' prices.
Apple has never acknowledged the upgradeability of the Mac Pro CPU, but the Mac Pro 2013's CPU is not soldered, thus making it upgradeable. Only four CPU configurations were offered by Apple, E5-1620v2, E5-1650v2, E5-1680v2, and the E5-2697v2, but users soon discovered that the E5 v2 family was compatible. Unlike the previous Mac Pros, the Mac Pro 2013 was only offered in a single CPU configuration.
Yes, the Mac Pro's GPUs can be swapped out, but only three different GPUs were ever produced for it, the AMD FirePro D300 2 GB, D500 3 GB, or D700 6 GB. Apple has kept tight control on these (any official repairs require the GPUs to be returned to Apple), and thus few-to-none exist on the aftermarket, and the two higher GPUs are prone to failures thanks to a wattage ceiling. For most intents and purposes, it is cheaper to buy a Mac Pro 2013 than to track down two GPUs. Apple discontinued the entry-level Mac Pro 2013 that sported the D300. All-new Mac Pros sold after April 4th, 2017, have either a D500 or D700.
The Mac Pro 2013 was supported on macOS 12 Monterey. It does not support Sidecar. Currently, OpenCore is a work in progress, fairly stable to get the Mac Pro 2013s up and running macOS 13 Ventura. For the latest information see, OpenCore Legacy Patcher and MacRumors: macOS 13 Ventura on Unsupported Macs Thread
The Mac Pro 2013 has had a few firmware upgrades. Unlike previous Mac Pros, where a firmware upgrade allowed for faster CPUs/RAM, AFPS, and NVMe booting for certain models, the Mac Pro 2013 has been meager. The MP61.0120.B00 boot ROM included support for NVMe booting (found in the High Sierra update). Most recently, the boot ROM version 188.8.131.52.0 was included in the 10.14.4 Developer Preview. With some firmware upgrades, some users found 4k displays no longer supporting 60 Hz, which requires an SMC reset and removing the offending PLists. See the useful links below. Previously the updates were distributed separately from the OS , but in 10.13+. they have been distributed with OS.
There's a large number of external storage upgrades for the Mac Pro 2013, from USB 2.0/3.0 to ThunderBolt 2.0, and listing them all would be an exercise in futility. What's important to understand is that there are many multi-drive enclosures, spanning everything from RAID to multiple SSDs. External SSDs perform well in Thunderbolt 2, able to achieve roughly 1.2 GB/s depending on the storage solution in various tests.
That said... users have figured out how to shoe-horn NVMe drives in the Mac Pro, offering higher-tier performance and much better prices. Unfortunately, no one has taken the time to compile a list, so the known so far are: Samsung 960, Samsung 970 Pro, Toshiba XG3, and Crucial P1. Samsung released a firmware fix for certain models as well, including the 970 Pro.
The Mac Pro 2013 uses the same interface as the 2013-2015 MacBooks. There's a cottage economy of NVMe adapters now floating around. The first adapters that users tackled, such as the GFF M.2 PCIe SSD Card, required a bit of filing and tape to successfully mount the card, which users on MacRumors were able to pull off. NVMe with ST-NGFF2013-C; Vega Internal GPU; Mac Pro 2013 (6,1). Later adapters like the Sintech NGFF m.2 NVMe SSD adapter do not require modification. The quick summary is you'll need a Mac Pro running 10.13+, an adapter, and an NVMe SSD with a Sintech adapter. If you, for some reason, choose the GFF adapter, you'll need tape, a file, and some free time.
Officially most sites list the maximum ram for the 2013 as 128. The Mac Pro 2013 uses PC3-15000 DDR3 ECC (1866 MHz) RAM, 4 RAM slots. The Maximum DIMM size is 32 GB. Maxing out the RAM can be a somewhat pricey endeavor, but sites like aliexpress and eBay.
The biggest modifications to the Mac Pro 2013 aren't internal but rather massive PCIe enclosures that generally cost in the $1500-4000 range, making them often as expensive as the computer itself. There are a few options on the market, like the Sonnet xMac Pro Server, which adds three full-length PCIe slots (you can see it on youtube), and the absolutely absurd JMR Quad Slot Expander adding 4 PCIe slots and 8 drive bay just to name a few. For the truly curious, you can see the JMR expansion system innards.
There's a wide variety of Thunderbolt 2 products, chiefly storage systems (including RAID setups), and ThunderBolt 2 docks still on the market. Due to the sheer amount, I'm unable to list them all, but it's important to remember that a fair amount of functionality missing from the 2013 Mac pro can be recaptured with Thunderbolt 2 like previously mentioned, PCIe slots, eGPUs, and the like.
The Mac Pro 2013 to date includes six Thunderbolt ports, the most found on any Mac before or since. To obtain peak performance, it's recommended that displays be connected separately from other high bandwidth utilities like external storage.
The Mac Pro 2013 can't be upgraded to Thunderbolt 3 bus speeds, but that doesn't mean it can't use Thunderbolt 3 / USB 3.1c devices (at the speed of Thunderbolt 2). Apple has a Thunderbolt 3 (USB-C) to Thunderbolt 2 Adapter, which is bi-directional, meaning the same adapter can also be used for Thunderbolt 3 Macs to use Thunderbolt 2 devices. Notably, not all Thunderbolt 3 devices are backward compatible, so you may want to check with the manufacturer for compatibility. 2b1af7f3a8